4-PAW GAS/ENGINE
50. Install the hydraulic line (marked with and F) to the
front hydraulic pump fitting (Fig. 1200).
51. Use a 15/16" wrench to tighten the hydraulic line nut
to the fitting (Fig. 1201).
5/4-26
Fig. 1200
DSC-1366a
Fig. 1201
DSC-1368a
52. Connect the positive and then the negative battery
cable to the battery. Position the battery clamp on
the battery up against the frame (Fig. 1202).
A
B
A. Negative battery cable B. Positive battery cable
53. Remove the absorbent towels.
Toro Wheeled CUL Service Manual
Fig. 1202
DSC-1369a