Toro 22317 Service Manual page 256

48. Position the hose clamp and tighten to secure the
suction hose to the fitting (Fig. 0849).
49. Position the battery into the main frame (Fig. 0850).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/GAS ENGINE
Fig. 0849 DSC-0801a
Fig. 0850 DSC-0807a
50. Connect the positive and then the negative battery
cable to the battery. Position the battery clamp on
the battery up against the frame. Install the carriage
bolt, washer and wing nut securing the battery clamp
to the frame (Fig. 0851).
D
A. Negative battery cable C. Wing nut, washer,
B. Positive battery cable
51. Install the hydraulic line (marked with and R) to the
rear hydraulic pump fitting (also marked with an R)
(Fig. 0852).
C A
B
Fig. 0851 DSC-0810a
carriage bolt
D. Battery clamp
Fig. 0852 DSC-0811a
4/4-27