Toro 22317 Service Manual page 326

19. Install a bolt to secure the pivot pin to the cylinder
yoke. Torque the bolt to 19 ft-lbs. (26 Nm) (Fig.
1094).
20. Position the attach plate to the loader arm pivot
points (Fig. 1095).
Toro Wheeled CUL Service Manual
Fig. 1094 DSC-1485a
DSC-1487a
Fig. 1095
4-PAW GAS/LOADER ARM
21. Install the right and left side pivot pins into the pivot
points (Fig. 1096).
22. Align the tilt cylinder ram with the attach plate center
pivot point. Install the center pivot pin securing the
tilt cylinder to the attach plate (Fig. 1097).
DSC-1489a
Fig. 1096
DSC-1491a
Fig. 1097
5/3-11