Toro 22317 Service Manual page 477

4-PAW DIESEL/ENGINE
36. Unplug the harness wire (blue) from the solenoid
terminal (Fig. 1628).
37. Using a Phillips screw driver, remove the screw
securing the oil sensor wire to the oil sensor (Fig.
1629).
6/4-10
Fig. 1628 DSC-2095a
Fig. 1629 DSC-2091a
38. Using a 1/4" socket, remove the self tapping screw
and washer securing the harness wire r-clamp to the
frame (Fig. 1630).
39. Unplug the dynamo (alternator) wires from the
harness wires (Fig. 1631).
Toro Wheeled CUL Service Manual
Fig. 1630 DSC-2096a
Fig. 1631 DSC-2099a