CHAIN DRIVE/HYDRAULICS
9. Using a 7/16" wrench and socket, install a nut onto
the counterbalance valve mounting bolt (Fig. 0564).
10. Using a 1-1/8" offset wrench, tighten the 3 remaining
hydraulic line nuts to the counterbalance valve
fittings and the hydraulic line nut to the front wheel
motor fitting.
11. Position the fuel tank on the fuel tank mounting
bracket (Fig. 0565).
4/2-8
Fig. 0564
DSC-0482a
Fig. 0565
DSC-0505a
12. Position the fuel tank mount plate (Fig. 0566).
13. Install the fuel tank mount bolt (Fig. 0567).
Toro Wheeled CUL Service Manual
Fig. 0566
DSC-0506a
Fig. 0567
DSC-0507a