Drive Chain Replacement
Drive Chain Removal
1. Park CUL on a level surface.
2. Raise the loader arm 6" - 12" (15 - 30cm) off the
ground.
3. Turn off the machine and remove the key.
4. Lift the rear of the machine (Fig. 0272).
5. Position jackstands under the rear 2 corners of the
machine. Remove the floor jack (Fig. 0273).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0100
Fig. 0272
DSC-0099
Fig. 0273
6. Raise the front of the machine (Fig. 0274).
7. Position jackstands under the front 2 corners of the
machine. Remove the floor jack (Fig. 0275).
DSC-0105
Fig. 0274
DSC-0107
Fig. 0275
4/1-1