7. Position two short spacers between the auxiliary
valve and the auxiliary bracket. Insert two bolts
through the auxiliary valve, spacers and bracket
(Fig. 0655).
8. Position the valve assembly to the upper frame
(Fig. 0656). Position two long spacers between the
selector valve and the frame. Loosely install two
bolts, washers and nuts.
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0655
PICT-9977a
Fig. 0656
PICT-9952a
9. Install and tighten the hydraulic metal lines to the
fittings on the auxiliary and selector valve (Fig. 0657
and Fig. 0658). Tighten the straight fitting between
the two valves.
Fig. 0657
PICT-9944a
Fig. 0658
PICT-9947a
4/2-33