12. Remove the fuel tank and set it on the operator's
stand (Fig. 0545).
13. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the rear upper counterbalance valve
fitting (Fig. 0546).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0545
DSC-0469a
Fig. 0546
DSC-0470a
14. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the front upper counterbalance valve
fitting (Fig. 0547).
15. Using a 1-1/8" offset wrench, remove the hydraulic
line nut from the lower front counterbalance valve
fitting (Fig. 0548).
Fig. 0547
DSC-0471a
Fig. 0548
DSC-0474a
4/2-3