Rear Sprocket & Wheel Hub Removal - Toro 22317 Service Manual

CHAIN DRIVE/DRIVE SYSTEM
Rear Sprocket & Wheel Hub Removal
1. Raise the machine off the floor. Refer to "Raising the
Traction Unit" on page 3/1-1.
2. Using a 1/2" socket, remove the 2 bolts securing the
chain cover to the main frame (Fig. 0380).
3. Remove the chain cover (Fig. 0381).
4/1-30
DSC-0191a
Fig. 0380
DSC-0192a
Fig. 0381
4. Rotate the wheels so the master link on the chain is
visible (Fig. 0382).
5. Using a 13/16" socket, remove the 5 lug nuts secur-
ing the rear wheel to the rear hub (Fig. 0383).
Toro Wheeled CUL Service Manual
DSC-0196
Fig. 0382
DSC-0193a
Fig. 0383