Toro 22317 Service Manual page 205

CHAIN DRIVE/HYDRAULICS
4. Remove the hydraulic hose from the upper fitting on
the hydraulic cylinder (Fig. 0666).
Note: Install a plug and cap on the hose and
cylinder fittings to help stop any oil leakage
and prevent debris from entering the system
(Fig. 0667).
4/2-36
Fig. 0666 DSC-2894a
Fig. 0667 DSC-2898a
5. Remove the hydraulic hose from the lower fitting on
the hydraulic cylinder (Fig. 0668).
6. Remove the shoulder bolt securing the upper pivot
pin to the cylinder (Fig. 0669).
Toro Wheeled CUL Service Manual
Fig. 0668 DSC-2902a
Fig. 0669 DSC-2905a