Toro 22317 Service Manual page 119

CHAIN DRIVE/DRIVE SYSTEM
15. Slide a washer over the axle (Fig. 0351).
16. Thread the castle nut onto the axle (Fig. 0352).
4/1-22
DSC-0329a
Fig. 0351
DSC-0332a
Fig. 0352
17. Using a 1-1/8" socket, tighten the nut to seat the
bearings then back it off. Back off nut so first slot in
nut aligns with hole in axle (Fig. 0353).
18. Install a cotter pin in the hole in the axle (Fig. 0354).
Toro Wheeled CUL Service Manual
DSC-0333a
Fig. 0353
DSC-0336a
Fig. 0354