13. Using a 1/2" socket, remove the 4 bolts securing the
hose cover to the main frame (Fig. 1232).
14. Remove the hose cover (Fig. 1233).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0838a
Fig. 1232
DSC-0839a
Fig. 1233
15. Using a 1-1/2" socket, loosen, do not remove, the
patch lock nut on the front wheel motor shaft (Fig.
1234).
Note: In 2004 there was a running change from
the castle nut and cotter pin (22312 serial
#240000200 and lower) to a patch lock nut
(22312 serial #240000201 and higher) for
retaining the wheel motors.
16. Install a wheel hub puller (TOR4096) onto the front
wheel hub (Fig. 1235).
DSC-0921a
Fig. 1234
DSC-0922a
Fig. 1235
6/1-3