4-PAW GAS/HYDRAULICS
7. Lower the loader arm until the loader arm end of the
cylinder rods are resting on the cylinder locks.
8. Loosen the 4 swell latches securing the hood to the
main frame (Fig. 0976).
9. Remove the hood (Fig. 0977).
5/2-2
Fig. 0976
DSC-0982a
Fig. 0977
DSC-0983a
10. Lift the rear of the machine (Fig. 0978).
11. Position jackstands under the rear 2 corners of the
machine. Remove the floor jack (Fig. 0979).
Toro Wheeled CUL Service Manual
Fig. 0978
DSC-0100a
Fig. 0979
DSC-0099a