ALL UNITS/GENERAL
9. Install a new o-ring onto the switch block and mount
to the valve body using two Allen cap screws (Fig.
0264).
10. Lubricate and install the detent ball housing and
return spring (Fig. 0265).
3/1-72
DSCN-2441a
Fig. 0264
DSCN-2457a
Fig. 0265
11. Place a new o-ring into the flat side of the detent
block and slide it over the detent spring (Fig. 0266).
12. Install a new o-ring onto the detent block (Fig. 0267).
Toro Wheeled CUL Service Manual
DSCN-2459a
Fig. 0266
DSCN-2462a
Fig. 0267