4. Remove the cable tie securing the hydraulic hoses
to the tilt cylinder barrel (Fig. 1428).
5. Remove the cable tie securing the hydraulic hoses
together (Fig. 1429).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1428
IMG-0116a
Fig. 1429
IMG-0120a
6. Place a drain pan under the front end of the machine
to catch the hydraulic fluid from the hydraulic hoses.
7. Remove the hydraulic hoses from the tilt cylinder
fittings. Allow the hydraulic fluid to drain into the
drain pan (Fig. 1430).
8. Install plugs in the hoses and fittings to prevent
contamination and oil leakage.
9. Remove the shoulder bolt securing the upper pivot
pin to the barrel end of the tilt cylinder (Fig. 1431).
Fig. 1430
IMG-0122a
Fig. 1431
IMG-0123a
6/2-31