Toro 22317 Service Manual page 273

4-PAW GAS/DRIVE SYSTEM
17. Install 5 lug nuts (reversed) to secure the hub puller
to the wheel hub (Fig. 0891).
18. Using a 1-1/2" socket, rotate the center puller bolt
to break the hub free of the wheel motor shaft (Fig.
0892).
5/1-4
DSC-0923a
Fig. 0891
DSC-0924a
Fig. 0892
19. Remove the 5 lug nuts and the puller from the hub
(Fig. 0893).
20. Remove the patch lock nut from the wheel motor
shaft and discard (Fig. 0894).
Toro Wheeled CUL Service Manual
DSC-0925a
Fig. 0893
DSC-0926a
Fig. 0894