CHAIN DRIVE/DRIVE SYSTEM
8. Install the seal into the hub until it is square and
flush with the top of the bore (Fig. 0446).
9. Pack the other bearing with grease and install to the
nut side of the hub.
4/1-48
IMG-0570a
Fig. 0446
Front Sprocket & Wheel Hub Installation
1. Install a sprocket onto the hub (Fig. 0447).
2. Install 5 bolts and nuts to secure the sprocket to the
front hub (Fig. 0448).
Toro Wheeled CUL Service Manual
DSC-0310a
Fig. 0447
DSC-0311
Fig. 0448