4. Remove the tie strap that holds the two hydraulic
hoses to the fitting between the two valves (Fig.
0640).
5. Remove the hydraulic hard line connected to the 90º
fitting located on the left side of the selector valve
(Fig. 0641).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0640
PICT-9943a
Fig. 0641
PICT-9944a
6. Remove the hydraulic hard line connected to the 90º
fitting located on the right side of the auxiliary valve
(Fig. 0642).
7. Remove the four bolts, spacers, washers, and nuts
securing the valves to the upper frame (Fig. 0643).
Fig. 0642
PICT-9947a
Fig. 0643
PICT-9949a
4/2-29