CHAIN DRIVE/DRIVE SYSTEM
Sprocket Installation
1. Install a sprocket onto the new hub (Fig. 0402).
2. Using a 3/4" socket and wrench, install 5 bolts and
nuts to secure the sprocket to the rear hub (Fig.
0403).
4/1-36
DSC-0231a
Fig. 0402
DSC-0232a
Fig. 0403
3. Torque the 5 bolts and nuts to 75 ft-lbs. (102 Nm)
(Fig. 0404).
Toro Wheeled CUL Service Manual
DSC-0233a
Fig. 0404