Toro 22317 Service Manual page 156

11. Using a 1-1/2" socket, loosen the lock nut from the
wheel motor shaft (Fig. 0485).
12. Slide a wheel hub puller (Toro part no. TOR6006)
onto the wheel hub studs (Fig. 0486).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0369a
Fig. 0485
DSC-0370a
Fig. 0486
13. Install the 5 lugs nuts backward (taper side facing
out) onto the studs (Fig. 0487).
14. Using a 1-1/2" socket, break the hub assembly free
of the wheel motor shaft (Fig. 0488).
DSC-0371a
Fig. 0487
DSC-0372a
Fig. 0488
4/1-59