Toro 22317 Service Manual page 433

4-PAW DIESEL/HYDRAULICS
13. Using an 11/16" wrench, install the lift cylinder
t-fitting onto the 4-spool valve fitting (Fig. 1472).
14. Tighten the hydraulic line nuts as follows:
a. Top fitting on counterbalance valve using a
1-1/8" wrench
b. Counterbalance valve line nut marked F using a
1-1/8" wrench
c. Bulkhead fitting line nut marked R using a 1-1/8"
wrench
d. Bulkhead fitting line nut marked F using a 1-1/8"
wrench
15. Remove the absorbent towel.
6/2-42
Fig. 1472 DSC-1811a
16. Slide the fan onto the fan adapter (Fig. 1473).
17. Using a 7/16" socket, install 4 bolts and lock wash-
ers securing the fan to the fan adapter. Torque the 4
bolts to 100 ± 10 ft-lbs. (136 ± 14 Nm) (Fig. 1474).
18. Install the radiator. Refer to "Radiator Installation" on
page 6/4-97.
19. Start the machine. Allow the air to purge from the
hydraulic system. Check the hydraulic lines and
fittings for leaks.
20. Turn the machine off and remove the key.
21. Check the hydraulic fluid level. Add if necessary.
Toro Wheeled CUL Service Manual
Fig. 1473 DSC-1777a
Fig. 1474 DSC-1782a