CHAIN DRIVE/HYDRAULICS
19. Remove the loader arm cylinder locks from the
cylinder rods (Fig. 0572).
20. Reinstall the loader arm cylinder locks onto the
hydraulic auxiliary lines (for storage) (Fig. 0573).
4/2-10
Fig. 0572
DSC-0452a
Fig. 0573
DSC-0449a
21. Lower the loader arms.
22. Check the hydraulic fluid level. Fill the hydraulic tank
per specifications.
23. Turn the machine on and run it to purge air from the
system. Check for leaks.
24. Turn the engine off.
25. Check and add hydraulic fluid to the hydraulic tank
as required.
Toro Wheeled CUL Service Manual