2. Mark the two hydraulic lines and fittings on the
selector valve (B & C) (Fig. 1369).
3. Mark the two hydraulic lines and fittings on the
auxiliary valve (D & E) (Fig. 1370).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1369
DSC-2962a
Fig. 1370
DSC-2965a
4. Remove the hydraulic line from the flow divider valve
fitting (marked 'A') (Fig. 1371).
5. Remove the hydraulic line nut from the fitting located
on top of the flow divider valve (Fig. 1372).
Fig. 1371
DSC-2968a
Fig. 1372
DSC-2969a
6/2-15