Lift Cylinder Replacement; Lift Cylinder Removal - Toro 22317 Service Manual

14. Plug the auxiliary valve safety switch into the
harness connector (Fig. 0663).
A. Switch
15. Check the hydraulic fluid level. Add fluid if necessary.
16. Start and run the machine to purge air from the
system.
17. Check for leaks.
18. Check the hydraulic fluid level. Add fluid if necessary.
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
A
B
Fig. 0663 PICT-9936
B. Harness Plug

Lift Cylinder Replacement

Lift Cylinder Removal

1. Start the unit and raise the lift arm all the way up.
Install a cylinder lock on the cylinder that you are not
removing (Fig. 0664).
2. Turn the machine off and remove the key.
3. Mark the upper hydraulic hose and cylinder fitting
(Fig. 0665).
Fig. 0664 DSC-2889a
Fig. 0665 DSC-2904a
4/2-35