Toro 22317 Service Manual page 333

4-PAW GAS/ENGINE
17. Remove the muffler assembly from the machine
(Fig. 1114).
18. Place an absorbent towel under the hydraulic pump
area.
19. Slide the 2 thermal sleeves up away from the
hydraulic pump fittings. Mark the 2 hydraulic lines F
and R (Fig. 1115):
F: Front hydraulic line
5/4-4
Fig. 1114 DSC-1112a
Fig. 1115 DSC-1114a
R: Rear hydraulic line
20. Using a 15/16" wrench, remove the hydraulic line
marked F from the front hydraulic pump fitting (Fig.
1116).
Note: Use a plug to protect the line from contami-
nation.
21. Using a 15/16" wrench, remove the hydraulic line
marked R from the rear hydraulic pump fitting (Fig.
1117).
Note: Use a plug to protect the line from contami-
nation.
Toro Wheeled CUL Service Manual
Fig. 1116 DSC-1115a
Fig. 1117 DSC-1116a