34. Clean and lubricate the threads of the 2 chain ten-
sioning bolts (Fig. 0333).
35. Using a 1-1/8" socket, remove the chain tensioning
bolts, jam nuts and washers from the axle assembly.
Remove the jam nut from each of the chain tension-
ing bolts (Fig. 0334).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0527a
Fig. 0333
DSC-0528a
Fig. 0334
36. Remove the 2 axle brackets (Fig. 0335).
Front Axle Assembly (Fig. 0336):
B
C
D
E
A. Front Axle
B. Chain tensioning
bolt (2)
DSC-0532a
Fig. 0335
B
E
A
DSC-0534a
Fig. 0336
C. Jam nut (2)
D. Washer (4)
E. Axle bracket (2)
C
D
4/1-17