Toro 22317 Service Manual page 178

14. Using a 1/2" wrench and socket, install a nut onto
the fuel tank mount bolt (Fig. 0568).
15. Position the battery into the frame (Fig. 0569).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0568 DSC-0465a
Fig. 0569 DSC-0458a
16. Position the battery clamp onto the battery and
against the frame. Install a wing nut, washer and
carriage bolt securing the battery clamp to the frame.
Connect the positive and then the negative battery
cable to the battery (Fig. 0570).
17. Raise the loader arm all the way up to remove
pressure from the loader arm cylinder locks.
18. Remove the clevis pin and cotter pin from the loader
arm cylinder locks (Fig. 0571).
Fig. 0570 DSC-0457a
Fig. 0571 DSC-0455a
4/2-9