7. Remove the left control lever assembly that routes
under the drive lever controls (Fig. 0604).
Note: This will be reinstalled after the 4-spool
valve is installed and the hydraulic lines are
connected.
8. Tighten the 3 set screws securing the control lever
rods (Fig. 0605).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0604
DSC-2806a
Fig. 0605
DSC-2812a
9. Insert the 4-spool Valve through the front opening of
the frame up into the upper frame assembly and rest
on top of air cleaner assembly (Fig. 0606).
10. Route the auxiliary relief valve metal line around the
choke cable (Fig. 0607).
Fig. 0606
DSC-2816a
Fig. 0607
DSC-2822a
4/2-19