4-PAW DIESEL/HYDRAULICS
Hydraulic Lift Cylinder Installation
1. Install 2 hydraulic fittings into the lift cylinder. Posi-
tion the fittings so they face each other (Fig. 1417).
2. Position the lift cylinder in the machine with the
ram end facing up, aligning the pivot points on the
cylinder with the pivot points on the frame and loader
arm (Fig. 1418).
6/2-28
Fig. 1417
IMG-0102a
Fig. 1418
IMG-0105a
3. Install a pivot pin through the barrel end pivot point
and frame (Fig. 1419).
4. Align the pivot pin through hole with the mounting
hole in the cylinder. Install a shoulder bolt to secure
the pivot pin. Torque the shoulder bolt to 150 to 170
in-lbs. (17 – 19 Nm) (Fig. 1420).
Toro Wheeled CUL Service Manual
Fig. 1419
IMG-0098a
Fig. 1420
IMG-0106a