Engine Replacement
Engine Removal
1. Park the CUL on a level surface.
2. Raise the loader arms to the fully raised position.
3. Turn off the engine and remove the key.
4. Remove the loader arm cylinder locks located on the
hydraulic auxiliary lines (Fig. 1103).
Toro Wheeled CUL Service Manual
Fig. 1103
DSC-0448a
4-PAW GAS/ENGINE
5. Position a loader arm cylinder lock over each lift
cylinder rod (Fig. 1104).
6. Secure each loader arm cylinder lock with a clevis
pin and hairpin cotter (Fig. 1105).
Fig. 1104
DSC-0452a
Fig. 1105
DSC-0455a
5/4-1