19. Install the bearing protector (Fig. 0355).
20. Using general purpose grease, fill the inner cavity of
the hub assembly (Fig. 0356).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0338a
Fig. 0355
DSC-0340a
Fig. 0356
21. Install the protective bearing cap (Fig. 0357).
22. Repeat steps 9 - 21 to install the sprocket and hub
assembly on the opposite side of the machine.
23. Route the chain around the top of the front wheel
sprocket (Fig. 0358).
DSC-0341a
Fig. 0357
DSC-0342a
Fig. 0358
4/1-23