Toro 22317 Service Manual page 92

7. Remove the neutral safety switch detent (Fig. 0252).
8. Remove the two Allen cap screws and the operator
assembly (Fig. 0253).
Toro Wheeled CUL Service Manual
DSCN-2438a
Fig. 0252
DSCN-2433a
Fig. 0253
ALL UNITS/GENERAL
9. Remove the spool from the body (Fig. 0254).
10. Remove the two O-rings from the valve body (Fig.
0255).
11. Flush and clean the valve housing with a cleaning
solvent and air dry. Inspect the valve and valve
components. Replace if nicks, scratches, wear, or
contamination are present.
DSCN-2430a
Fig. 0254
IMG-0202a
Fig. 0255
3/1-69