Toro 22317 Service Manual page 388

5. Remove the floor jack.
6. Using a1-1/16" socket, tighten the 2 wheel motor
fittings (Fig. 1302).
7. Using a 1/1/8" wrench, install the lower hydraulic line
to the lower wheel motor fitting (Fig. 1303).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0875a
Fig. 1302
DSC-0878a
Fig. 1303
8. Rotate the upper hydraulic line into position aligning
it with the upper wheel motor fitting. Use a 1-1/8"
wrench to install the upper hydraulic line to the upper
wheel motor fitting (Fig. 1304).
9. Use a 1-1/8" wrench to tighten the rear upper
hydraulic line to the bulkhead fitting in the main
frame (Fig. 1305).
DSC-0881a
Fig. 1304
DSC-0882a
Fig. 1305
6/1-21