4-PAW GAS/HYDRAULICS
4. Loosely install the hydraulic hard line nut marked R
to the lower fitting on the front of the counterbalance
valve (Fig. 0999).
5. Install the mounting bolt and washer through the
counterbalance valve (Fig. 1000).
5/2-8
Fig. 0999
DSC-1015a
Fig. 1000
DSC-1022a
6. Position the spacer in between the counterbalance
valve and the frame. Slide the bolt through the
spacer and frame (Fig. 1001).
7. Install a washer onto the mounting bolt (Fig. 1002).
Toro Wheeled CUL Service Manual
Fig. 1001
DSC-1024a
Fig. 1002
DSC-1025a