ABB RELION REX640 Technical Manual page 641

1MRS759142 F
Parameter Values (Range)
3=No validity
EF validity Min Curr 0.005...0.200
Ena cyclic reset
0=Disable
1=Enable
Intr EF reset time 40...60000
Table 641: IFPTOC Non group settings (Basic)
Parameter Values (Range)
Operation
1=on
5=off
Operation principle 1=EF current based
2=Touch voltage
based
Enable harmonics
0=Disable
1=Enable
Operation mode
1=Alarming EF
2=Tripping EF
Enable XC Op mode 1=on
5=off
Reset delay time 0...6000
Ena Intermit EF
1=on
mode
5=off
Enable SOTF mode
1=on
5=off
SOTF Cond dura- 100...16000
tion
SOTF operate time 40...6000
Table 642: IFPTOC Non group settings (Advanced)
Parameter Values (Range)
SOTF reset time 100...10000
Revert time 200...10000
Max Dur delta Calc 300...10000
Intr EF counter Lim 3...20
Table continues on the next page
REX640
Technical Manual
Unit Step
*In 0.001
ms 10
Unit Step
ms 10
ms 10
ms 10
Unit Step
ms 10
ms 10
ms 10
1
Protection functions
Default Description
0.010 Minimum current
for EF validity eval-
uation. Note that
In means residual
nominal current.
1=Enable Enable adaptation
of fault direction
determination to
a fault direction
change during the
fault
500 Reset delay time
used in intermit-
tent earth fault
module
Default Description
1=on Operation Off / On
2=Touch voltage Operation principle
based
0=Disable Enable harmonics
for fault current
calculation
2=Tripping EF Operation criteria
1=on Enable cross-coun-
try fault tripping
functionality
20 Reset delay time
1=on Enable intermittent
earth fault module
1=on Enable Switch-On-
To-Fault logic mod-
ule
2000 Switch-On-To-Fault
module duration
60 Switch-On-To-Fault
module operate de-
lay time
Default Description
500 Reset delay time
for Switch-OnTo-
Fault (SOTF) mod-
ule
300 Revert time for del-
ta-calculation
2000 Maximum duration
for delta calcula-
tion
3 Peak counter lim-
it for discrimina-
tion of intermittent
earth fault from
641