ABB RELION REX640 Technical Manual page 342

Protection functions
Parameter Values (Range)
Curve parameter C 0.02...2.00
Curve parameter D 0.46...30.00
Curve parameter E 0.0...1.0
Table 380: PHHPTOC Non group settings (Advanced)
Parameter Values (Range)
Minimum operate 20...60000
time
Reset delay time 0...60000
Measurement
1=RMS
mode
2=DFT
3=Peak-to-Peak
PHIPTOC Settings
Table 381: PHIPTOC Group settings (Basic)
Parameter Values (Range)
Start value 0.10...40.00
Start value Mult 0.8...10.0
Operate delay time 20...300000
Table 382: PHIPTOC Non group settings (Basic)
Parameter Values (Range)
Operation
1=on
5=off
Num of start pha-
1=1 out of 3
ses
2=2 out of 3
3=3 out of 3
Table 383: PHIPTOC Non group settings (Advanced)
Parameter Values (Range)
Reset delay time 0...60000
4.1.1.11 Monitored data
PHLPTOC Monitored data
Table 384: PHLPTOC Monitored data
Name Type
START_DUR FLOAT32
PHLPTOC Enum
342
Unit Step
0.01
0.01
0.1
Unit Step
ms 1
ms 1
Unit Step
xIn 0.01
0.1
ms 10
Unit Step
Unit Step
ms 1
Values (Range)
0.00...100.00
1=on
Default
2.00
29.10
1.0
Default
20
20
2=DFT
Default
1.00
1.0
20
Default
1=on
1=1 out of 3
Default
20
Unit Description
% Ratio of start time / op-
erate time
Status
1MRS759142 F
Description
Parameter C for
customer program-
mable curve
Parameter D for
customer program-
mable curve
Parameter E for
customer program-
mable curve
Description
Minimum operate
time for IDMT
curves
Reset delay time
Selects used meas-
urement mode
Description
Start value
Multiplier for scal-
ing the start value
Operate delay time
Description
Operation Off / On
Number of phases
required for oper-
ate activation
Description
Reset delay time
REX640
Technical Manual