ABB RELION REX640 Technical Manual page 382

Protection functions
Parameter Values (Range)
Operate delay time 20...300000
Arm delay time 40...300000
Disarm delay time 40...300000
Table 429: GAEPVOC Non group settings (Basic)
Parameter Values (Range)
Operation
1=on
5=off
Table 430: GAEPVOC Non group settings (Advanced)
Parameter Values (Range)
Reset delay time 0...60000
4.1.4.9 GAEPVOC Monitored data
Table 431: GAEPVOC Monitored data
Name Type
START_DUR FLOAT32
GAEPVOC Enum
4.1.4.10 Technical data
Table 432: GAEPVOC Technical data
Characteristic
Operation accuracy
Start time
Reset time
Reset ratio
Table continues on the next page
1
Results based on statistical distribution of 1000 measurements.
2
Measured with static signal output (SSO).
382
Unit
ms
ms
ms
Unit
Unit
ms
Values (Range)
0.00...100.00
1=on
2=blocked
3=test
4=test/blocked
5=off
1,2
Step Default
10 40
10 5000
10 500
Step Default
1=on
Step Default
1 20
Unit
%
Value
Depending on the frequency of the measured
current and voltages: f
Current: ±1.5% of the set value or ± 0.002 × I
Voltage: ±1.5% of the set value or ±0.002 × U
Typically 20 ms
Typically 35 ms
Typically 0.96
1MRS759142 F
Description
tection (Phase-to-
phase value of volt-
age)
Operate delay time
Time delay to arm
the function
Time delay to dis-
arm the function
Description
Operation Off / On
Description
Reset delay time
Description
Ratio of start time / op-
erate time
Status
±2 Hz
n
n
n
REX640
Technical Manual