ABB RELION REX640 Technical Manual page 478

Protection functions
Parameter Values (Range)
2=DFT
3=Peak-to-Peak
Min operate current 0.5...100.0
Min operate volt- 1.0...100.0
age
Correction angle 0.0...10.0
Pol reversal
0=False
1=True
Pol quantity
3=Zero seq. volt.
4=Neg. seq. volt.
DEFHPDEF Settings
Table 547: DEFHPDEF Group settings (Basic)
Parameter Values (Range)
Start value 0.10...40.00
Start value Mult 0.8...10.0
Directional mode
1=Non-directional
2=Forward
3=Reverse
Time multiplier 0.025...15.000
Operating curve
1=ANSI Ext. inv.
type
3=ANSI Norm. inv.
5=ANSI Def. Time
15=IEC Def. Time
17=Programmable
Operate delay time 40...300000
Characteristic an- -179...180
gle
Max forward angle 0...180
Max reverse angle 0...180
Min forward angle 0...180
Min reverse angle 0...180
Voltage start value 0.010...1.000
Table 548: DEFHPDEF Group settings (Advanced)
Parameter Values (Range)
Type of reset curve
1=Immediate
Table continues on the next page
478
Unit Step
%In 0.1
%Un 0.1
deg 0.1
Unit Step
xIn 0.01
0.1
0.005
ms 10
deg 1
deg 1
deg 1
deg 1
deg 1
xUn 0.001
Unit Step
1MRS759142 F
Default Description
0.5 Minimum operating
current
1.0 Minimum operating
voltage
0.0 Characteristic cor-
rection angle in
IoCos and IoSin
mode
0=False Rotate polarizing
quantity
3=Zero seq. volt. Reference quantity
used to determine
fault direction
Default Description
0.10 Start value
1.0 Multiplier for scal-
ing the start value
2=Forward Directional mode
1.000 Time multiplier
in IEC/ANSI IDMT
curves
15=IEC Def. Time Selection of time
delay curve type
40 Operate delay time
-90 Characteristic an-
gle
80 Maximum phase
angle in forward di-
rection
80 Maximum phase
angle in reverse di-
rection
80 Minimum phase an-
gle in forward di-
rection
80 Minimum phase an-
gle in reverse direc-
tion
0.010 Voltage start value
Default Description
1=Immediate Selection of reset
curve type
Technical Manual
REX640