Manual Types For This Product - Epson GX Series Manual

Industrial Robot: SCARA Robots GX series Manual
Manipulator
GX-A series
GX4-B,GX8-B series
GX10-B, GX20-B series
Setting from the software
EPSON
RC+
This manual contains the procedures for configuring the settings from the software.
Use of this software is indicated by the above mark.
Controller power on (off)
In this manual, an instruction to "Turn on (off) the Controller power" means to turn on the power for the hardware that makes
up your Controller.
Images used in this manual
The photos and illustrations of the Manipulators shown in this manual may differ in shape and appearance from your
Manipulator due to the time it was shipped, specifications, and other factors.

1.8 Manual Types for This Product

This describes the typical types of manuals for this product and presents an overview of their content.
Safety Manual (booklet, PDF manual)
This manual contains safety-related information intended for all people who use this product. It also guides the user
through the process from unpacking to usage and the manuals that should be referred to next.
Please read this manual first.
Safety information and residual risks of robot systems
Declaration of Conformity
Training
Process from unpacking to usage
Robot Controller Safety Function Manual (PDF manual)
This describes the procedures for configuring the safety functions of this product and the configuration software. It is
primarily intended for those who design robot systems.
RC700-D Manual, RC700-E Manual (PDF manual)
This manual describes the installation of the entire robot system and explains the specifications and functions of the
Controller. It is primarily intended for those who design robot systems.
Robot system installation procedure (specific details on the process from unpacking to usage)
Controller daily inspection points
Controller specifications and basic functions
GX Series Manual (PDF manual)
This manual describes the specifications and functions of the Manipulator. It is primarily intended for those who design
robot systems.
Manipulator installation, technical information needed for design, function and specification tables, etc.
Manipulator daily inspection points
Controller
RC700-D EPSON RC+ 7.0 Ver. 7.5.1B or later
EPSON RC+ 7.0 Ver.7.5.4 or later
RC700-E
EPSON RC+ 7.0 Ver.7.5.4A or later
Software
Rev.7
13