Epson GX Series Manual page 187

Industrial Robot: SCARA Robots GX series Manual
GX8-A65**W, GX8-B65**W: Approx.37 kg (82 lbs)
Ceiling mounting specifications
GX8-A45**R, GX8-B45**R: Approx.33 kg (73 lbs)
GX8-A55**R, GX8-B55**R: Approx.34 kg (75 lbs)
GX8-A65**R, GX8-B65**R: Approx.35 kg (77 lbs)
When transporting the Manipulator over long distances, secure it directly to transporting equipment so that it
will not fall. If necessary, pack the Manipulator using the same packaging as delivery.
The Manipulator must be installed to avoid interference with surrounding buildings, structures, and other
machines and equipment that may create a trapping hazard or pinch points.
Resonance (resonating sound or minute vibrations) may occur during Manipulator operation depending on
the rigidity of the base table. If the resonance occurs, improve the rigidity of the base table or change the
speed or acceleration and deceleration settings of the Manipulator.
For details on the Manipulator installation procedure for models with standard specifications and ESD specifications, refer to
the following sections.
"Table Top Mounting Specifications"
"Wall Mounting Specifications"
"Ceiling Mounting Specifications"
For Manipulator models with cleanroom & ESD specifications and with protected-model, refer to the following sections.
"Cleanroom & ESD Specifications"
Rev.7
187