Epson GX Series Manual page 318

Industrial Robot: SCARA Robots GX series Manual
Symbol Description
a Sheet
b Arm #1 stop bolt
c Arm fixing bolt
d Cable tie
Bolt: M4 × 15
e
Washer
3. While supporting the bottom of Arm #1 by hand so that the Manipulator does not fall over, remove the anchor bolts. Then,
remove the Manipulator from the wall.
GX10-B65**W
Symbol Description
a Center of gravity
GX10-B85**W, GX20-B85**W
Rev.7
318