Authorization Code - Philips Sopho 2000 IPS User Manual

AUTHORIZATION CODE

PROGRAMMING
START
CM08 Specify the processor for this feature.
Specify whether Service Set Tone should be
provided after dialing the access code for
Authorization Code.
CM12 Assign Service Restriction Class A for Autho-
rization Code to the required stations.
CM15 Allow Authorization Code in Service Restric-
tion Class A assigned by CM12 Y=02.
Specify the entry of Authorization Code after
dialing an LCR access code and desired
number.
[Series 3900 software required]
NOTE:
CM20 Assign the access code for Authorization
Code.
A
DESCRIPTION
To provide this operation, the
following data assignments are
required.
- Toll restriction
(CM12 Y=01,
CM8A Y=5XXX: 000, CM81)
- LCR origination
(CM20: A126/A127/A128/A129,
CM8A Y=5XXX: 180, CM85)
(1) 216: Processor for Authorization Code
(2) 0 : MP card
1 : OAI (ACF)
(1) 362: Service Set Tone after dialing the ac-
cess code
(2) 0 : No tone
1 : Service Set Tone
• Y=02
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=31 Authorization Code
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
• Y=401
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 0 : Allow
7 : Restricted
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A086: Authorization Code
– 86 –
AUTHORIZATION CODE
DATA
NWA-008845-001 Rev.5.0
32ch1002.fm
JUNE/01/2007