Philips Sopho 2000 IPS User Manual page 393

When one Paging trunk is connected with multiple AMP relay circuits or one Paging trunk is connected
with two AMP relay circuits simultaneously.
[Other than EU]
[Series 3900 software required]
START
CM14 Assign the Paging Trunk (COT card and DK
card) to the required LEN.
NOTE 1:
CM08 Specify ON/OFF condition for external relay/
external key on MP built-in DK00 card.
Specify the method of the starting AMP relay
circuit.
NOTE 1:
NOTE 2:
A
DESCRIPTION
The DK card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
Set the second data to 0 when one
Paging trunk is connected with mul-
tiple AMP relay circuits or with two
AMP relay circuits simultaneously.
Set the second data to 1 when one
Paging trunk is connected with one
AMP relay circuit.
EXTERNAL PAGING WITH MEET-ME
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) D000-D255 : COT card
E800-E831
For FP No. 00: E800-E807
For FP No. 01: E808-E815
For FP No. 02: E816-E823
For FP No. 03: E824-E831
NOTE 2:
(1) 700
(2) 0 : ON (Ground Start)
OFF (Ground Off [Open])
1 : ON (Ground Off [Open])
OFF (Ground Start)
(1) 734
(2) 0 : To specify by Access Code
1 : To specify per trunk
– 375 –
DATA
: DK card
Circuit No. 3 of E831 is used for
built-in External Equipment In-
terface of MP card by setting
CM44.
NWA-008845-001 Rev.5.0
JUNE/01/2007
32ch1006.fm