Direct Station Selection/Busy Lamp Field (Dss/Blf) Console - Philips Sopho 2000 IPS User Manual

DIRECT STATION SELECTION/BUSY LAMP FIELD (DSS/BLF) CONSOLE

PROGRAMMING
START
CM10 Assign the DSS Console number to its associ-
ated LEN.
CM14 Assign the DSS Console number to its associ-
ated LEN.
[Series 3200 R6.2 software required]
NOTE:
CM96 Assign a single-line station, D
DESKCON to work in conjunction with the
DSS Console.
CM97 Assign the station and trunk numbers, as need-
ed, to the keys on each DSS Console.
Assign a Do Not Disturb and Message waiting
function key on each DSS Console, if needed.
When providing Do Not Disturb or Message
Waiting function key, assign a changing Func-
tion key on each DSS Console.
A
DIRECT STATION SELECTION/BUSY LAMP FIELD (DSS/BLF) CONSOLE
DESCRIPTION
When using Series 3500 software or
later, for the FP No. 00-03 of MP
built-in FP/FP card of Main Site
and MP built-in FP of Remote Site,
the DSS console number (E100-
E131) can be assigned without limit
as shown right.
term
, or
(1) 000-763: LEN
(2) DSS Console No.
For PIM0/1 : E100-E107
For PIM2/3 : E108-E115
For PIM4/5 : E116-E123
For PIM6/7 : E124-E131
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) DSS Console No.
For FP No. 00 : E100-E107
For FP No. 01 : E108-E115
For FP No. 02 : E116-E123
For FP No. 03 : E124-E131
(1) 00-31: DSS Console No. (Last two digits of
(2) X-XXXXXXXX: Station No./My Line No.
E000-E007
(1) DSS Console No. (00-31) +
No. (00-59)
(2) X-XXXXXXXX: Station No.
D000-D255
(1) DSS Console No. (00-31) +
No. (57-59)
(2) F1049: Message Waiting Set/Reset
F1053: Do Not Disturb Set/Reset
(1) DSS Console No. (00-31) +
No. (56)
(2) F1052: Function Change
– 325 –
DATA
E100-E131 assigned by CM10/
CM14)
term
of D
: ATTCON No.
,
: Trunk No.
,
,
NWA-008845-001 Rev.5.0
+ DSS Key
+ DSS Key
+ DSS Key
32ch1006.fm