Philips Sopho 2000 IPS User Manual page 400

A
Assign the fax call station and fax station using
CM52
Hotlines feature.
CM12 Specify the accommodation of the fax call sta-
tion to the D
NOTE:
CM90 Assign the fax call station number as the arriv-
al indicator to the D
END
(2) House Phone
START
CM10 Assign the fax call station number. This num-
ber is used as the fax call indicator button on
term
the D . Also this is the number to which the
incoming fax call is directed.
CM14 Assign the fax call station number. This num-
ber is used as the fax call indicator button on
term
the D . Also this is the number to which the
incoming fax call is directed.
[Series 3200 R6.2 software required]
A
DESCRIPTION
term
.
This command needs to be set when
assigning a single line station as a
fax call station number by CM10/
CM14.
term
.
DESCRIPTION
• Y=00-99
(1) 0: Fax Call Station (calling side)
This is the extension to which the call is
directed and will be the fax call indicator
on the D
(2) X-XXXXXXXX: Station No.
(1) 1: Fax Station (called side)
This is the actual single line port to be
connected to the facsimile machine.
(2) X-XXXXXXXX: Station No.
• Y=05
(1) X-XXXXXXXX: Fax Call Station No.
(2) 0 : Accommodated
1 : Not accommodated
• Y=00
(1) My Line No. +
(2) X-XXXXXXXX: Fax Call Station No.
(1) 000-763: LEN
(2) X-XXXXXXXX
FX-FXXXXXXXX: My Line No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX
FX-FXXXXXXXX: My Line No.
– 382 –
FAX ARRIVAL INDICATOR
DATA
term
.
,
+ key No.
DATA
: Single Line Station
No.
: Single Line Station
No.
NWA-008845-001 Rev.5.0
32ch1007.fm