Philips Sopho 2000 IPS User Manual page 453

Programming for Example 1:
STEP1: Assign "9" to the access code of LCR Group 0 in Numbering Plan Group 0.
+ 200 +
ST
STEP2: Assign Area Code Development Pattern No. 5 to LCR Group 0.
+ 8AA000 +
ST
STEP3: Assign Route Pattern No. 00 to area code (212) for Area code Development Pattern No. 5.
+ 8A4005 +
ST
STEP4: In Route Pattern No. 00, specify the order of LCR selection as shown below.
1st: Route 02 (FX)
+ 8A0000 +
ST
2nd: Route 01 (WATS)
+ 8A0000 +
ST
3rd: Route 00 (DDD)
+ 8A0000 +
ST
STEP5: In LCR Pattern No. 000 (for FX), delete the area code dialed.
+ 8A5000 +
ST
STEP6: Assign the Toll Restriction Pattern to each Route (LCR Pattern No.).
For LCR Pattern No. 000 (Route 02):
+ 8A5000 +
ST
For LCR Pattern No. 001 (Route 01):
+ 8A5001 +
ST
For LCR Pattern No. 002 (Route 00):
+ 8A5002 +
ST
STEP7: Assign the maximum number of digits dialed.
+ 855 +
ST
+ 9 + + A126 +
DE DE
+ 0 +
DE DE
+ 212 +
DE
+ 1 +
DE DE
+ 2 +
DE DE
+ 3 +
DE DE
+ 151 +
DE
LCR Pattern No. 000
+ 000 +
DE
+ 000 +
DE
+ 000 +
DE
+ 212 +
DE DE
Area Code
Area Code
Development
Pattern No. 5
LEAST COST ROUTING-3/6 DIGIT
EXE
+ 4005 +
EXE
+ 0000 +
DE EXE
+ 000 02 +
EXE
LCR Pattern No. 000
+ 001 01 +
EXE
LCR Pattern No. 001
+ 002 00 +
EXE
LCR Pattern No. 002
+ 0 +
DE EXE
To delete
+ 10 +
DE EXE
Toll Restriction Pattern No. specified by CM81
+ 09 +
DE EXE
+ 01 +
DE EXE
+ 10 +
EXE
10 digits (including the area code)
– 435 –
NWA-008845-001 Rev.5.0
32ch1007.fm