Philips Sopho 2000 IPS User Manual page 746

A
CM41 If the data for CM17 Y=A is "0", set the inter-
val time for UCD Delay Announcement.
Specify the UCD Delay Announcement con-
nection timer.
Specify the maximum UCD call waiting time
before answer or abandonment for UCD PEG
Count, and waiting time before UCD Delay
Announcement.
CM49
Assign the UCD Delay Announcement func-
tion to the required Digital Announcement
Trunk.
CM20 To record, replay and delete a message, assign
the Digital Announcement Trunk access code,
respectively.
CM51 When transferring the call to a station or Atten-
dant after the 1st interval time of UCD Delay
Announcement, assign the destination.
A
DESCRIPTION
UNIFORM CALL DISTRIBUTION (UCD)
• Y=0
(1) 47
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
• Y=0
(1) 67
(2) 01-32: 4-128 seconds
If no data is set, the default setting is 8-12 sec-
onds.
• Y=0
(1) 16
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 0B0XX : UCD Delay Announcement
11XX : UCD Second Delay Announce-
XX
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access code
(2) A100: Record
A101: Replay
A102: Delete
• Y=17
(1) 00-63: Tenant No.
(2) Destination:
X-XXXXXXXX: Station No.
E000
– 728 –
DELAY ANNOUNCEMENT-UCD
DATA
(4 second increments)
(4 second increments)
(4 second increments)
Card No. (EB002-EB127)
assigned by CM10/CM14
ment
: 00-15: UCD group No.
: Attendant Console
NWA-008845-001 Rev.5.0
32ch1011.fm