Call Pickup-Group - Philips Sopho 2000 IPS User Manual

CALL PICKUP-GROUP

PROGRAMMING
START
CM16 Assign each Call Pickup group, by assigning
station numbers within a group one by one
with the following operation:
1st Operation : (1) Station A (2) Station B
2nd Operation : (1) Station B (2) Station C
Last Operation: (1) Station X (2) Station A
CM20 Assign the access code for Call Pickup-Group.
CM90 Assign a Call Pickup-Group key to each D
as required.
END
NOTE 1: There is no limit to the amount of Call Pickup groups.
NOTE 2: The maximum number of stations within a group is 60. Individual stations can be assigned to
only one Call Pickup group.
DESCRIPTION
• Y=0
(1) X-XXXXXXXX: Station No. to be includ-
(2) X-XXXXXXXX: Another Station No. to
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A020: Call Pickup-Group
term
, • Y=00
(1) My Line No. +
(2) F0020: Call Pickup-Group
– 170 –
CALL PICKUP
CALL PICKUP-GROUP
DATA
ed in the Call Pickup
group
be included in the same
group
,
+ Key No.
NWA-008845-001 Rev.5.0
32ch1003.fm