Philips Sopho 2000 IPS User Manual page 512

B
CM76 Assign the data for interpreting the digits re-
ceived.
CM36 For a mobile phone of Mobility Access, allow
tandem connection between the incoming
trunk route and the outgoing trunk route.
CM08 Specify the destination of DID call transfer to
an attendant by CM51 Y=00/03/06 in system.
CM51 Assign the destination of DID call transferred
when the station is busy/unassigned/no an-
swer.
NOTE:
The 1st data is set to the tenant No.
of called station.
CM35 Provide release of ISDN trunk when receiving
the ISDN DISCONNECT message with
Progress Description=08 from ISDN (effective
for an outgoing call to ISDN).
Provide release of ISDN trunk when receiving
the ISDN DISCONNECT message with
Progress Description=08 from ISDN (effective
for an incoming call to ISDN).
C
DESCRIPTION
• Y=01 Day Mode
• Y=02 Night Mode
• Y=03 Mode A
• Y=04 Mode B
(1) 000-999: Number Conversion Block No.
(2) NONE : No data
• Y=0
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
(2) 0: Allow
(1) 241
(2) 0: Tenant of called station
• Y=00 No Answer
• Y=03 Busy
• Y=06 Unassigned
(1) 00-63: Tenant No.
(2) Destination:
X-XXXXXXXX: Station No.
E000: Attendant Console
• Y=158
(1) 00-63: Trunk Route No.
(2) 0: To provide
• Y=208
(1) 00-63: Trunk Route No.
(2) 1: To provide
– 494 –
MOBILITY ACCESS
DATA
assigned by CM76 Y=00/90
NWA-008845-001 Rev.5.0
JANUARY/20/2006
32ch1008.fm