Cid Call Back - Philips Sopho 2000 IPS User Manual

CID CALL BACK

PROGRAMMING
START
CM08 Specify Message Waiting Lamp indication on
term
the D to which Message Waiting/Message
Reminder is set.
Specify the time display for Message Waiting/
Message Reminder on D
Provide the system with CID Call Back.
Specify whether CID Call Back is provided or
not when an incoming call is forwarded, when
a station to which a call is terminated is busy,
or a station to which a call terminated is set Do
Not Disturb.
[Series 3900 software required]
NOTE:
A
DESCRIPTION
term
with LCD.
CID Call Back by this command is
available under the following condi-
tions.
term
• The D station line is set to
Call Forwarding-All Calls/Call
Forwarding-Busy Line/Call For-
warding-No answer/Call For-
term
warding-D IP logout when a
trunk call is terminated.
term
• The D station line is set to Do
Not Disturb when a trunk call is
terminated.
term
• The D station line received
the incoming call is busy when a
trunk call is terminated.
(1) 294
(2) 0 : Flashing 60 IPM
1 : Steady Lighting
(1) 280
(2) 0 : 24-Hour
1 : 12-Hour
(1) 493
(2) 0: To provide
(1) 588
(2) 0 : To provide
1 : Not provided
– 199 –
CID CALL BACK
DATA
NWA-008845-001 Rev.5.0
32ch1004.fm
JUNE/01/2007